Operating Instructions Combilock Simplex; Programming / Changing The Code 2 Combilock Simplex 200; Deleting Code 2; Additional Functions Combilock 200 Simplex - Insys Combilock 200 Simplex Handbuch

CombiLock 200 simplex / pro / pro RFID
3

Operating Instructions CombiLock simplex

3.1 Programming / Changing the Code 2
CombiLock simplex 200
(with the electronic lock open only):




3.2

Deleting Code 2

(with the electronic lock open only):


3.3

Additional Functions CombiLock 200 simplex

In order to Open with Timed Unlocking Delay, enter the Code a second time after
the end of the Release period. In case the second code input is not entered within
the set duration of the release period, opening with timed unlocking delay has to be
restarted from the beginning.
Timed delay
Timed delay
Timed delay
Sequence of functions with timed delay set to 6 minutes
Enter Code 1 or 2

Timed delay
set to last 6 minutes
Handbuch V.1.09A
Code 1
(when changing it, input of Code 1 or Code 2)
new Code 2 (sample code)
repeat new Code 2
Code 1
1 - 3 Minutes> Release
4 - 10 Minutes> Release
11 - 99 Minutes> Release
Enter Code 1 or 2 again
during the release period
50
1 Minute
2 Minutes
3 Minutes

Release period lasts
2 minutes with timed delay
lasting 4-10 minutes
Open lock within 10 sec
after entering the Code
nd
for the 2 time

10 sec time span
for opening,
cannot be set
INSYS locks