Upload Initialization Data; Device Name; Access To Smartportal - axing SKM 40-00M Betriebsanleitung

3.7.7.

Upload Initialization Data

In the section UPLOAD SYSTEM INITILIZATION DATA FROM FILE you can upload the initiaization data from a
file to the modul.
 Choose a configuration file.
 Click on UPLOAD.
The upload will take a few seconds.
After the upload you have to log in again.
3.7.8.

Device name

In the section DEVICE NAME you can set a new device name for the module.
 Enter a name in the field SET NEW DEVICE NAME.
 Click on SAVE CHANGES.
The new device name is shown at the login.
3.7.9.

Access to SMARTPortal

If you are a registered user of the SMARTPortal, then you can remotely control the module via the SMARTPortal
and, if necessary, receive support from AXING.
Prerequisite is an internet connection for the module.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 35