Changing The Password; Rebooting - axing SKM 40-00M Betriebsanleitung

 Click SAVE & REBOOT to confirm and save the changes.
When the changes are saved, the device will reboot automatically.
 The new IP address has to be entered in the web browser and the enter password dialog will be displayed.
3.7.3.

Changing the password

The default password is: Ramsen8262.
The default password should be changed right after commissioning the module.
 Type an new password with 8-10 characters (letters and/or digits).
 Re-enter the password.
 Click SAVE CHANGES to confirm and save the changes.
When the changes are saved, the frontpage will be shown.
3.7.4.

Rebooting

Under REBOOT THE SYSTEM the device can be rebooted.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 33