Operation instructions | MIP 8-00 | MIP 16-00 | MIP 8-06 | MIP 16-06
3.6.7.
Save Initialization Data
In the section SAVE SYSTEM INITILIZATION DATA TO FILE you can save the current initilization data from phase
1 to 3 into a file on your computer.
Click on SAVE.
The config.dat file is generated. You can save these on your computer.
Click on PDF TO PRINT.
A PDF of the configuration is generated that can be opened or saved.
Note: Password and IP adress will not be saved.
3.6.8.
Upload Initialization Data
In the section UPLOAD SYSTEM INITILIZATION DATA FROM FILE you can upload the initiaization data from a
file to the device.
Choose a configuration file.
Click on UPLOAD.
The upload will take a few seconds.
After the upload you have to log in again.
30
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.