Selected Programmes; Maintenance; Updating Software - axing SKM 40-00M Betriebsanleitung

3.6.3.

Selected Programmes

The programme table SELECTED PROGRAMS shows the programmes that were activated in phase 2.
3.7.

Maintenance

The menu entry MAINTENANCE enables software updates, changing the IP address, changing the password,
restarting the module and erasing service data.
Under Current Settings, you will find the following information:
•
Firmware version: Displays the firmware version and the output modulation type.
•
Software version: Displays the version of the interface
•
Serial number of the device
•
Operating temperature (must be -10 ° C ... + 50 ° C)
Important: If you stay on the maintenance page for more than 2.5 minutes, an automatic logout will occur
and you will have to repeat the login procedure.
3.7.1.

Updating Software

 After an update, initialization data saved with older Software versions can be loaded into the headend with
a newer Software version.
 Initialization data saved with the current Software versions can not be loaded into headends with an
older Software version.
 Therefore, if possible, make a Software update of all headends.
We recommend the AXING SMARTPortal for easier handling and overview (see 1.6 on page 7)
Download
You can find software/firmware updates for download by entering the article in the search field on
www.axing.com. On the product page you will find the current software/firmware in the Downloads tab.
 Download the current version of the file to your computer and unpack it.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 31