Login And Logout; Changing The Password; Changing The Ip Address - axing SKM 40-00M Betriebsanleitung

Operation instructions | SKM 40-00M | SKM 40-04M | SKM 80-00M
3.1.

Login and logout

The web-based user interface is protected against unauthorized access. When accessing the user interface, the
first thing is the password request.
The standard language of the user interface is English. In the header, the the language of the user interface can
be changed. The possibilities are German (DE) and English (EN). The chosen language applies until the end of
the session.
 To log out, click LOG OUT.
Notes:
•
If the browser is closed while you are still logged in, an automatic logout occurs 2.5 minutes later.
•
If the browser window stays open, there is no automatic logout. It allows monitoring the installation via
the web browser.

Changing the password:

 Please change the password immediately after the first commissioning and choose a sufficiently safe
password. Keep this password at a safe place.
 Menu item: MAINTENANCE > SET NEW PASSWORD (see 3.7.3 on page 33).

Changing the IP address:

If needed, the modules can be integrated in a network. For this application, some changes must be applied to
the network configuration.
 Menu item MAINTENANCE > SYSTEM OPTIONS (see 3.7.2 on page 32).
16
 Enter the default password: Ramsen8262
 Click ENTER PASSWORD.
 If you are not automatically forwarded to the start
page, click OPEN PAGE.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.
Language