Bit Error Rate; Found Programmes; Initialization Phase 2 - axing SKM 40-00M Betriebsanleitung

Operation instructions | SKM 40-00M | SKM 40-04M | SKM 80-00M
3.3.3.

Bit error rate

The BIT ERROR RATE is shown. The amount of bit errors for the last 1,000,000 transferred bits is calculated.
3.3.4.

Found programmes

After a successful station scanning, the radio and TV stations are shown in the area FOUND PROGRAMS. The
table contains information about the Program Name, the Type and the Encryption.
3.4.

Initialization phase 2

In the initialization PHASE 2, the found programmes are subdivided by tuner.
 Click on PHASE 2, to select programs.
After the station scanning in initialization phase 1 no programms are activated.
All lines of the programme table have in the "Modulator" column four colored buttons M1 to M4. The buttons
correspond to the four modulators. The allocation of the buttons is given in the COLOR CODES legend.
You can assign programmes to modulators in REMUX MODE or in CROSS MULTIPLEX MODE.
 With each programme you asign to an modulator, the data rate rises.
 The performed modifications are only taken over by the system when you click on SAVE CHANGES.
20 2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.