Log Entries - axing SKM 40-00M Betriebsanleitung

Operation instructions | SKM 40-00M | SKM 40-04M | SKM 80-00M
 In the State field, select Enabled.
 Activate, if required, the option AXING support allowed.
 In the field Location, enter a name for the location of the module. This name will appear later in the
SMARTPortal to help you identify the module.
 In the field Email address, enter the e-mail address with which you are registered at SMARTPortal.
 In the field User key, enter the user key that you received when registering at SMARTPortal.
 Click on SAVE & REBOOT. The data is saved, the module is rebooted and the connection to the SMARTPortal
is established.
Where required, you have to adjust the connection data (see 3.7.2 on page 32).

3.7.10. Log entries

Under LOGS you can see the log entries of the headend.
•
The system log is written to the flash memory, so it is still available after rebooting the headend.
•
The status log is written to RAM and is empty after rebooting the headend.
 Choose Statuslog.
The entries of the status log are displayed.
 Choose Systemlog.
The entries of the system log are displayed.
 Click SAVE LOG to save the respective log entries as a txt file.
 Click on ERASE LOG to delete the respective log entries.
36 2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.