Mounting And Installation; Mounting And Installation In A Headend Base Unit - axing SKM 40-00M Betriebsanleitung

Operation instructions | SKM 40-00M | SKM 40-04M | SKM 80-00M

2. Mounting and Installation

The headend modules can be operated either in a headend base units or stand-alone with the external power
supply unit.
 Installation must be performed by authorized and skilled electricians only.
 Before inserting or changing a module, pull the mains plug of the headend base unit from the socket!
 Observe the operation instructions of the corresponding headend base unit!
 Observe the operation instructions of the corresponding power supply unit!
 The antenna system must be installed and grounded according to the DIN EN 60728-11 standard.
2.1.

Mounting and installation in a headend base unit

 Observe the operating instructions of the headend basic unit.
 There has to be used galvanic isolator between the output connector and antenna network in Sweden and
Norway state area.
10 2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.