Changing The Ip Address - axing SKM 40-00M Betriebsanleitung

Operation instructions | SKM 40-00M | SKM 40-04M | SKM 80-00M
Update
New software can be installed under SOFTWARE FILE.
 Click under SOFTWARE FILE on „Browse...".
 Browse for the file onyour computer.
 Click on UPDATE.
The file will be uploaded to the device.
After this the update of the device begins, the remaining time ist shown as a countdown.
The module will be automatically rebooted after an update (setted parameters will not be lost).
 After the update, log in again.
3.7.2.

Changing the IP address

The network options are configured under the menu item MAINTENANCE> SYSTEM OPTIONS.
Dynamic IP adress
 Use dynamic IP address to connect the device to a network with a DHCP server.
Static IP adress
 Use a static IP address to connect the device to a network with a fixed IP address. The IP address,
netmask and the gateway can be changed here. In addition, DNS server 1 and DNS server 2 can be
entered.
32 2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.