Cleaning Modes; Auto Mode - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

Pausing
Press the Start / pause button on the robot
vacuum cleaner
12
during cleaning to pause the cleaning mode.
With the robot vacuum cleaner paused, you can
press the directional buttons
control to have it move left / right / forwards /
backwards.
Note: If pause more than 10 minutes the robot
vacuum cleaner will enter Sleep mode and the
"Start / Pause" button
Press the "Start / Pause" button on the robot
vacuum cleaner
12
again to exit Sleep mode. Then press the button
corresponding to the mode of your choice to
resume cleaning.
Note: When the product resumes after being paused,
it may recalculate the area and may clean areas it
has already cleaned.
Note: If you own two robot vacuum cleaners it may
be possible to operate both at the same time using
one remote control.

Cleaning modes

The product features different cleaning modes for
better results. You can select the modes by pressing
the key in the control panel, the remote control or
in the app.
To switch the next mode, ensure the product is
"Awake". If it is asleep, press the "Start / Pause"
button on the robot vacuum cleaner
remote control to exit sleep mode.
28
or the remote control
28
on the remote
27
will go off.
12
or the remote control
28
or the
12
Classic mode
In this mode the product moves in all directions.
This mode is recommended for cleaning carpets.
Press the "Start / Pause" button on the robot
vacuum cleaner
12
to start "Classic mode".

Auto mode

In this mode the product uses parallel, overlapping
lanes. It will first vacuum along the edges of the room
for guidance and to measure the room.
Press the "Auto mode" button on the robot
vacuum cleaner
13
to start this mode.
or the remote control
28
or the remote control
34
GB/IE 41