Operation Via Alexa - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

In the "Profile" menu, click "Share Robot".
Select your robot. The app will then show the
QR code and the user can scan the QR code
to be able to control the robot vacuum cleaner.
The other user must now open the "Profile" menu
and click "Scan QR-Code".
Use a different mobile to scan in the code and
be able to control the robot vacuum cleaner.
Feedback
In the "Profile" menu, click "Feedback".
Enter your e-mail address and select your robot
model from the drop-down menu. Describe your
problem. You may also upload pictures. Then
submit the message.

Operation via Alexa

To operate the robot vacuum cleaner via Alexa, you
require an Alexa-enabled device, an Amazon Alexa
account and a robot vacuum cleaner account which
has at least one Alexa-enabled robot vacuum cleaner
connected to it.
Download the Amazon Alexa app and go to
"Devices" in the menu.
Click on "MY SMART HOME SKILLS" and
then "ENABLE SMART HOME SKILLS".
Now search for: "SILVERCREST SSRA1 AX EU".
Click on "ENABLE FOR USE" and link your
robot vacuum cleaner app account.
After you have successfully linked your accounts, you
can only control the robot vacuum cleaner with the
following commands:
Note: If you give a command without stating a
vacuum mode, the robot vacuum cleaner starts in
"Classic mode".
Action Command
Start vacuum Alexa, tell Silverrobot
modes, func- {robot name} start in
{vacuum mode}
tions with
auto, classic,
Alexa, tell Silverrobot
corner and
to start in {vacuum mode}
spot mode
Alexa, tell Silverrobot
to vacuum in {vacuum mode}
Alexa, tell Silverrobot
{robot_name} clean
Alexa, tell Silverrobot
{robot_name} clean up
Alexa, tell Silverrobot
to vacuum
Alexa, tell Silverrobot
{robot_name} start in
{vacuum mode}
Alexa, tell Silverrobot
{robot name} vacuum in
{vacuum mode}
Alexa, tell Silverrobot
vacuum in {vacuum mode}
GB/IE 53