Connecting The Product To The App; Disconnecting - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

Connecting the product
to the app
When the robot vacuum cleaner beeps and the
WiFi indicator stays lit, the robot vacuum cleaner
successfully connected to the WiFi network.
The first user connecting to the product becomes
the administrator for the product. Only the adminis-
trator is able to share the product with other users.
Other users can only disconnect from the product.
After successfully connecting the app will open
a pop-up window where you can assign a
name to your robot. Then click "Confirm".
The app will then automatically switch to the
"Robot" menu.
Note: If the robot vacuum cleaner is switched
off and you want to reconnect it to WiFi, switch
on the robot vacuum cleaner and it will auto-
matically reconnect to the same WiFi network.
Note Administrator rights are linked to the
email address.
46 GB/IE

Disconnecting

Disconnecting through the administrator
In the "Robot" menu, select your robot and
swipe left.
Click "Disconnect".
Disconnecting through the robot vacuum
cleaner
Switch on the robot vacuum cleaner and wait
about 30 seconds to determine if the robot
vacuum cleaner connects to the WiFi network.
If the robot vacuum cleaner is connected to the
network it will remind you with a beep and the
WiFi indicator on the robot vacuum cleaner
will switch from blinking to steady.
Whilst connected to the WiFi, hold down the
"Spot mode / Decrease time" button
approx. 4 seconds until you hear a beep. The
robot vacuum cleaner has been disconnected
from all users. The consumer can then restart
the robot vacuum cleaner and connect to it.
for
15