Virtual wall
The virtual wall
divides your house / your apart-
5
ment into separate areas in order to improve the
cleaning efficiency of the product. For better perfor-
mance, place the virtual wall
of a of a passage less than 3 m wide.
The virtual wall
5
which blocks the product across a length of up
to 3 m.
Before using the virtual wall
install the 2 AA batteries (included). Open the
battery cover and insert the batteries. Please
note the indicated polarity.
Set the switch on the virtual wall
to switch it on.
The virtual wall
5
the laser is parallel to the floor and the battery
compartment is on the underside.
Set the switch on the virtual wall
when not in use.
Position your robot vacuum cleaner in the
"Cleaning area" as shown.
at a door or in front
5
creates an invisible barrier
you need to
5
to "ON"
5
must be positioned so that
to "OFF"
5
Area
Area
Schedule
For easy cleaning you can set the time and schedule
for future cleaning on the robot vacuum cleaner or
in the app.
Setting the time
Hold the "Set schedule" button
2 seconds with the robot vacuum cleaner "Awake".
The robot vacuum cleaner will emit a sound, the
display
will flash and the robot vacuum
1
cleaner will enter "Set clock mode".
Press the "Decrease / Increase time" buttons
to set the current time. Use "Set schedule"
16
to switch between minute, hour and day.
Press the "Auto mode"
time
,
buttons to choose between a 12 or
15
16
24 hour display.
After setting the time, press the "Start / Pause"
button
to save.
12
Note: If no buttons are pressed for 15 seconds,
the robot vacuum cleaner will exit the time setting;
the settings will be lost.
Setting the schedule
Press the "Set schedule" button
vacuum cleaner "Awake". The robot vacuum
cleaner will beep and "Symbol" and "MON"
will blink. The robot vacuum cleaner will enter
"Set schedule mode".
Press the "Decrease / Increase time" buttons
to set the desired cleaning time. Use the
16
: outside work area
: work area
for approx.
14
15
14
or decrease / increase
13
with the robot
14
15
GB/IE
,
,
43