Cleaning - Silvercrest SAS 7.4 LI B3 Bedienungsanleitung

NOTE
► If you carry the appliance horizontally or with the wet suction nozzle
pointing upwards, it is possible that liquid can leak out:
3) To switch the appliance on, slide the on/off switch
indicator lamp
4) When you have finished using the appliance, slide the on/off switch
the rear .
NOTE
► Place the handheld vacuum cleaner in the wall bracket
charging process once the vacuum power has become noticeably weaker
and the charge indicator lamp

Cleaning

To achieve the best results, empty the dirt container
after every use .
CAUTION! MATERIAL DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents . These could
damage the outer surfaces of the appliance .
1) To open the dirt container
dirt container
2) Remove the dust filter
opening of the dust filter
3) Empty the dirt container
4) Pull the dust filter bag
5) Rinse the dust filter bag
dry before reinserting it into the dust filter
SAS 7.4 LI B3
lights up green .
7
flashes green .
7
, press the release button
q
.
q
from the dirt container
0
and pulling it out .
0
.
q
with its holder out of the dust filter
9
out in cold water and wait until it is completely
9
forwards . The charge
6
and start the
3
and clean the dust filter
q
and remove the
8
by reaching into the
q
.
0
. Do not dry it with hot air .
0
GB │ IE
1
to
6
0
│ 11 ■