Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PALA 20-Li A1 Gebrauchsanweisung, Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PALA 20-Li A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Explanation of the symbols on the appliance:
Read the operating instructions
and safety advice before initial
operation.
Wear protective gloves!
Wear safety shoes!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Protect the appliance from rain
and moisture!
Risk of fatal electrical shock!
Keep at least 10 m away from
power lines and at least 15 m
away from other people.
Attention! Beware of falling
objects, especially when cutting
above head height.
Beware of flying objects!
Attention! Risk of injury from
sharp blades.
Before performing any mainte-
nance work, turn the appliance
off and disconnect the battery!
GB │ IE │ NI
4 
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
PALA 20-Li A1

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis