Overview Of The Connection States; Symbol Meaning - Sartorius PMA.Vision VIS1Y Installationsanleitung

4.3.3 Web Browser Access
When the network connection is properly configured, the
scale can be accessed using a web browser from any device
on the network. The IP address or the name of the scale is
needed for this.
Enter one of the following addresses in the address bar of the
web browser:
− http://172.18.13.96/system/htm/index.htm
− http://PAINT/system/htm/index.htm
Changing the Device Name of the Scale
The scale appears on the network with a device name
(device ID). The device ID is the serial number by default.
Follow these steps to change the device ID:
Press the "i" button to call up the "Settings" menu.
t
Go into the submenu "Ethernet."
t
Go into the submenu "Device ID."
t
Select "t" to enter a new device ID.
t
Enter a new device ID in the displayed input box.
t
Only letters, numbers, and hyphens may be used.
Confirm with the l button.
t
12 Installation Instructions VIS1Y
4.4

Overview of the Connection States

Symbol Meaning