Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
17. Tips and useful information
• Measuring errors may occur when operating the product
outdoors due to light refraction or sunlight. Perform
measurements in suitable light conditions.
• Due to their physical properties, the following surfaces
may result in incorrect measurements:
- Transparent surfaces (e.g. glass, water)
- Reflective surfaces (e.g. glass, shiny metal)
- Porous surfaces (e.g. insulating materials)
- Structured surfaces (e.g. roughcast, natural stone)
• Use a tripod (not included) in order to achieve consistent
results.
18. Troubleshooting
Code
204
220
255
256
261
Cause
Calculation error
Low battery power
The reflected signal
is too weak or
measurements take
too long.
The reflected signal
is too strong
The result is outside
of the measurement
range
Solution
Repeat the
measurement.
Replace or recharge
the batteries.
Select a different
measurement
surface.
Ensure that you
measure within the
measuring range.
71
Werbung
Kapitel
Inhaltsverzeichnis
