Time-Controlled Freezing Down; Temperature-Controlled Freezing Down - Gram SF 930 Bedienungsanweisung

The storage program can be stopped by pressing . The LED will flash.
The storage program cannot be stopped when one of the other programs is running.
If one of the other programs is running, the set temperature can be seen on the
display by pressing . When the LED flashes, press an arrow key.

Time-controlled freezing down.

Program setting.
Press ; the LED will then flash and the set time will be displayed.
(If a change of time setting is required, see section "Changing temperature and time
settings").
Program sequence.
The program is started by pressing . The LED will light up continuously.
The display alternates each 5th second, between cabinet temperature and remaining
program time. The set time can be displayed by holding down one of the arrow keys.
(If a change of time setting is required, see section "Changing temperature and time
settings").
The program is stopped and the LED goes out when the program time has elapsed.
The program can now be completed by pressing . The LED will go out. A defrost
follows and the control switches over to the storage program.

Temperature-controlled freezing down.

Program setting.
Press ; the LED will then flash and the set temperature will be displayed.
(If a change of temperature setting is required, see section "Changing temperature
and time settings").
Program sequence.
The program can be started by pressing . The LED lights up continuously. The
display alternates every 5th second, between cabinet temperature and set
temperature.
(If a change of temperature setting is required, see section "Changing temperature
and time settings").
The program is stopped and the LED goes out when the set temperature is reached.
76-504-0970 18/GB