Environmental Protection Measures; Installation, Maintenance And Repair Work - ECOLAB Versatronic Modbus Beschreibung

Safety and security
Dangers of chemicals
DANGER!
Risk of injury to the skin and eyes caused by the chemical used.
– Safety regulations and prescribed protective clothing when handling
chemicals should be followed.
– Notes in the product data sheet of the chemical used must be observed.
DANGER!
Wash hands before breaks and at the end of work. Handle with good
industrial hygiene and the use of the PSA can be found in the relevant
safety data sheet and observe.
ENVIRONMENT!
Leaking and spilled chemicals can harm the environment.
Professionally record and discard leaking and spilled chemicals according
to the instructions of the safety data sheet.
Be sure to pay attention to the use of the prescribed PPE.
Preventive action:
– Place product containers in a tank to collect leaking fluids without
harming the environment.
2.7.3

Environmental protection measures

ENVIRONMENT!
The environmental symbol denotes environmental protection measures.
2.8

Installation, maintenance and repair work

NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools during assembly,
maintenance or troubleshooting. Only use the correct tools.
417102397 Rev. 1-10.2019 14