Operation
Switching on and off
Switching on:
♦
First, press the trigger lock
switch the tool on.
Switching off:
♦
Release the trigger
♦
When you have finished working, disconnect the appliance from
the compressed-air source.
Maintenance, cleaning and storage
WARNING! RISK OF INJURY! Disconnect the
appliance from the compressed-air supply.
CAUTION!
►
Before maintenance, clean off any hazardous substances that
may (due to working processes) have accumulated on the
appliance. Avoid all skin contact with these substances. If the
skin comes into contact with hazardous dusts, this can lead
to severe dermatitis. If dust is produced or swirled up during
maintenance, it can be inhaled.
NOTE
To ensure correct functioning and long-term durability of the appli-
ance, pay attention to the following points:
■
Sufficient and continuously intact oil lubrication is highly impor-
tant for optimum functioning.
PDKS 6.3 B3
forwards and then the trigger
.
GB │ IE
│
45
to
■