Parkside PDKS 6.3 B3 Originalbetriebsanleitung Seite 38

■ Make sure that the retractable cover moves rapidly from the fully
open position to its fully closed position when released.
■ Retractable covers must never be locked in an open position or
tied or otherwise deactivated.
■ When using the machine, the operator's hands may be exposed
to hazards such as cuts, abrasions and heat. Wear suitable
gloves to protect your hands.
■ The operator and maintenance personnel must be physically
capable of handling the size, mass and power of the machine.
■ Hold the machine correctly: Be ready to counteract any normal
or sudden movements – keep both hands ready.
■ Ensure that your body is balanced and that you have a secure
standing position.
■ Avoid cutting and cutting injuries: Avoid contact with the saw
blade or saw blade when the air supply is connected to the
machine. Wear protective equipment such as gloves, apron and
helmet.
■ Injuries can be caused by uncontrolled movements of the machine:
Always ensure that the guide plate (if fitted) is held firmly against
the workpiece.
■ Cutting with these machines leads to sharp corners.
Wear gloves to protect your hands.
■ Release the start/stop control in the event of an interruption to the
power supply.
■ Use only the lubricants recommended by the manufacturer.
■ Protective equipment such as safety glasses must be used; suitable
gloves and protective clothing are recommended.
■ Be aware that the built-in rotating tool will start after the command
device for starting and stopping has been released.
PDKS 6.3 B3
GB │ IE │
35 ■