Hazards Caused By Flying Parts; Hazards Caused By Entanglement; Hazards During Operation - Parkside PDKS 6.3 B3 Originalbetriebsanleitung

Hazards caused by flying parts

■ If a workpiece or accessory or even part of the machine tool itself
breaks, parts can be flung off at high speeds .
■ When operating circular and oscillating sawing machines or
sawing machines with reciprocating saw blades, always wear im-
pact-resistant eye protection . The degree of necessary protection
must be evaluated separately for each individual task .
■ Ensure that the workpiece has been securely fixed in place .
■ Ensure that sparks and metal chips are directed so that they do
not cause any hazards .
■ Ensure that the saw blade or cutting edge is correctly and firmly
clamped .

Hazards caused by entanglement

■ There may be a risk of suffocation, scalping and/or cuts if loose
clothing, jewellery, necklaces/scarves (or similar), hair or gloves
are not kept away from the machine and its accessories .

Hazards during operation

■ Avoid contact with the saw blade to avoid cutting your hands or
other parts of your body .
■ Protective covers must be securely in place and in good functional
condition .
■ Defective, curved or heavily worn protective covers must be
replaced with protective hoods recommended by the machine
manufacturer .
■ 60 │ GB │ MT