Parkside PDKS 6.3 B3 Originalbetriebsanleitung Seite 49

■ The appliance should be serviced regularly (approximately after
1–2 operations).
■ Always wear suitable work gloves.
■ Maintenance may only be carried out by instructed persons.
A long service life and trouble-free operation of this quality
product are guaranteed by compliance with the maintenance
instructions given.
■ Check the condition of your consumables and accessories every
time you service them.
■ Regularly check the tightness of all screws, the stop bracket and
the saw blade. Also check the speed and vibration level of the
appliance regularly.
Disconnect the appliance from the compressor if it runs irregularly.
■ Check the condition of the saw blade regularly. The saw blade
must not be defective or deformed.
■ Clean your tool with a dry soft cloth or blow it out lightly with
compressed air.
Never use caustic cleaning agents.
■ Make sure that no liquids get into the saw.
■ Store the appliance protected from the weather in dry rooms that
are inaccessible to children.
│ GB │ IE
■ 46