The following options are available:
♦
Attach a maintenance unit with an oiler to the compressor.
♦
Install a fitted oiler into the compressed-air line or the compressor.
♦
Add 3–5 drops of pneumatic oil into the connector nipple
every 15 minutes of operation.
Connecting to a compressed-air source
NOTE
►
Before connecting the compressed-air source
–
the correct working pressure (3–6.3 bar) must be fully
reached, and
–
you must ensure that the trigger is in its initial position.
♦
Attach the tool to a compressor by connecting the connector
nipple
with the supply hose of the compressed-air source.
♦
The compressed-air source must be equipped with a pressure
reducer so that you can regulate the air pressure.
PDKS 6.3 B3
GB │ IE
│
43
■