Before use
Lubrication
WARNING!
►
Avoid eye and skin contact with lubricants.
►
Inform yourself about the health hazards of the oil used in the
safety data sheet of the respective manufacturer.
NOTE
►
Regular lubrication is particularly important to avoid friction and
corrosion damage. We recommend using a suitable special oil
for compressed-air tools (e.g. Liqui Moly compressor oil).
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally lubri-
cates the grinder as a preparation stage after the pressure
reducer. A mist oiler gives off fine drops of oil into the air
flow and thus guarantees a regular lubrication.
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions. Add 3–5 drops of
pneumatic oil into the connector nipple
Topping up the oil
To ensure that the compressed-air saw remains operational for as
long as possible, make sure that there is sufficient pneumatic oil in
the appliance.
│
GB │ IE
■
42
.