Cleaning Instructions - Angelo Po 091FR1E Bedien- Und Installationshandbuch

At the end of each session of use and whenever
necessary, clean:
– The well (see page 12)
– The accessories (see page 12)
– The appliance and the surrounding environment
(see page 12)

CLEANING INSTRUCTIONS

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning procedure,
disconnect the electricity supply using the
circuit-breaker and allow the appliance to
cool.
The precautions which follow are also impor-
tant.
1 - Clean all parts of the appliance with warm
water, food-approved detergents and non-
abrasive materials only.
2 - Thoroughly clean all parts which come
into direct or indirect contact with foods
and all surrounding areas.
IT CLEANING THE WELL, BASKET SUPPORT AND ACCESSORIES
To carry out this operation,
proceed as follows.
GB
1 - Switch the appliance off
and leave it to cool (see
DE
page 9).
2 - Turn off the
breaker to disconnect it
FR
from the
mains.
ES
3 - Drain and filter the oil
(see page 10).
4 - Remove and clean the
baskets and the basket
support structure (A).
5 - Use the lever (B) to swing the heating elements
(C) into the vertical position.
6 - Apply a food-grade detergent to the inside of
the well.
7 - Rinse the well with drinking water and drain.
8 - Apply a specific product or a water and vinegar so-
lution to the well to remove the detergent residues.
English
circuit-
A
electrical
Every 100 working hours have skilled, author-
ised personnel carry out the following operations.
– Check that the safety thermostat is working cor-
rectly
– check that the electrical system is in good work-
ing order
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
3 - Rinse surfaces with drinking water and dry.
4 - Pressurised water jets may only be used on ex-
ternal parts.
5 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
6 - Remove food residues immediately before they
set.
7 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
C
9 - Rinse, empty and dry the well.
10 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
- 12 -
B
IDM-39614401200.tif