Mounting; General Installation Notes - HBM TB1A Montageanleitung

5

Mounting

TB1A
5.1

General installation notes

When the torque measuring‐disc is fitted in test benches,
the test bench components (frame, couplings, mounting
flanges, screw fittings, etc.), affect the deflection
performance in the shaft run and thus the measuring
characteristics (zero point, sensitivity, reproducibility).
The causes for this can include:
S
Additional parasitic loadings such as radial forces,
axial forces or bending moments
S
Asymmetrical torque introduction in the transducers
A0162-8.0 HBM: public
Mounting
11