HBM TB1A Montageanleitung Seite 7

TB1A
S
The cover or enclosure shall protect against crushing
or cutting and provide protection against parts that
might come loose.
S
The covers and enclosures shall be installed at a safe
distance from moving parts or shall prevent anyone
putting their hand inside.
S
The covers and enclosures shall even be fitted if the
moving parts are installed in areas to which persons
do not usually have access.
The above regulations may only be diverged from, if
machine parts are already sufficiently protected owing to
the design of the machine or because other precautions
have been taken.
A0162-8.0 HBM: public
Safety instructions
5