HBM TB1A Montageanleitung Seite 20

Mounting
Screwed joint
mounting flange
18
Z
Fig. 5.3 Screwed joint of the measuring body
5. Before finally fastening the screws, turn the reference
torque measuring‐disc on the centering until all screw
heads are located about centrically in the connection
element's clearance bores. The screw heads may in
no case be in contact with the sides of the mounting‐
flange clearance bores.
6. Fasten all screws with the specified tightening torque
(Tab. 5.1).
7. For further installation of the shafting, there are eight
threaded bores on the mounting flange. Also use
screws of property class 10.9 and fasten with the
tightening torque specified in Tab. 5.1.
A0162-8.0 HBM: public
Screwed joint
measuring body
TB1A