HBM TB1A Montageanleitung Seite 16

Mounting
14
Asymmetrical torque distributions
Asymmetrical (axially uneven) torque distribution in the
shaft run can lead to deflections, that then cause
parasitic loadings.
Countermeasures:
1. Use all the available screw connections for the mount­
ing.
2. Keep strictly to the prescribed fastening bolt tightening
torques.
3. Avoid making unnecessary bore holes in the adapta­
tion flanges.
4. Use flange surfaces that are clean, flat and as pol­
ished as possible.
5. Avoid having torque introductions and outlets right on
the outside diameter of the measuring disc.
6. Use adaptation flanges with sufficiently large clear­
ance bores to stop the screws locking up.
A0162-8.0 HBM: public
TB1A