Panasonic EYFLA7A Bedienungsanleitung Seite 29

Wireless communication specifications
[EYFLA7AR, EYFLA8AR, EYFLA8CR, EYFLA8PR, EYFLA9CR, EYFLA9PR, EYFMA2CR, EYFMA2PR]
Antenna
Assembly Qualifier
ø Communication distance between tool and qualifier is horizontally
10 m if there is no barrier in between.
¢ There is a risk of less communication range and/or communication error in conditions
as below.
• Obstacle to disturb radio wave such as metals and/or reinforced concrete between tool and
qualifier.
• Metal cover on qualifier's antenna.
• Operator's body between tool and qualifier.
• Devices creating radio noise such as PC and/or mobile phone near tool and/or qualifier.
¢ Check the conditions below regarding qualifier's location and setting.
• When qualifier is installed or its location is changed, check the signal strength by signal
strength indication lamp.
• If qualifier's reaction speed is significantly slow, change qualifier's location and/or channel
setting.
• If strength of radio signal is weak, change qualifier's location and/or channel setting.
ø about 10 m
- 29 -
Compatible tool
EN