Stiga ZERO TURN MOWER 915333 Gebrauchsanweisung Seite 22

Interval Task
25 Hours Check
or Every Battery
Season
Lubricate
Unit
50 Hours Check
or Every Fasteners
Season
100 Hours Check All
or Every Belts
Season
Action
Keep battery and battery terminals clean. See Cleaning Battery and
Battery Cables on page 27.
1. Apply grease to zerk (1) on each front wheel.
2. Apply grease to quick adjust seat mechanism through slots (2) on
bottom side of seat plate. Work grease into mechanism by sliding
seat back and forth repeatedly.
2
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts and
bolts to the correct torque values.
Replace worn or deteriorated belts.
• Check hydrostatic belt. See Replacing Hydrostatic Belt on
page 29 for hydrostatic belt location.
• Check PTO belt. See Replacing PTO Belt on page 28 for PTO
belt location.
EN - 20
1