Storage; Waste Disposal And Environmental Protection; Replacement Parts/Accessories - Parkside PDOS 200 C2 Originalbetriebsanleitung

Storage

• Store the appliance in a dry place well
out of reach of children.
• Grinding discs must be stored dry and
upright and are not to be stacked.

Replacement parts/accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone
(see "Service-Center" page 48). Please have the order number mentioned below ready.
Position Position
Instruction Exploded
manual drawing
1,2,3 14-21
11 30,32-34,46 Workpiece support, left
30-34
14 6,38,39
10 49
26
10a 47
27
10b 25
* A = granulation / external diameter x hole x thickness in mm
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have inished with them.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out into pure materials
and recycling can be implemented. Ask your
Service Center about this. Defective units re-
turned to us will be disposed of for free.
www.grizzly-service.eu
Description
Spark protection, holder and adjusting screw 91103042
Workpiece support, right
On/off-switch
Grinding disc, left
(A 36 / Ø 150 mm x Ø 12,7 mm x 20 mm)* 91103553
Grinding disc, right
(A 80 / Ø 150 mm x Ø 12,7 mm x 20 mm)* 91103554
Grinding disc nut, left
Grinding disc nut, right
Clamping lange
Machines are not to be place with
domestic waste.
GB MT
Order
number
91103558
91103559
91103557
91103551
91103555
91103552
45