Digital Rpm Indicator Operating Instructions; Main Parts; Warning Lights - Beta Motorcycles EVO 2T EUROPA Handbuch

2

DIGITAL RPM INDICATOR OPERATING INSTRUCTIONS

MAIN PARTS

Time
Stopwatch: According to setup distance
to record the testing time.
Speed Log: Average speed and max
Speedometer
speed record.
Display range: 0~360km/h (0~225 MPH)
Display unit: km/h or MPH
Indicator lights
High beam light (Blue)
Direction light (Green)
Adjust Button
MIL Indicator light
Press the Adjust button in the main screen
to switch between ODO, Trip A/B,
Total Hour meter, Hour meter A/B.
Select button
Press and hold the Adjust button for 3 seconds
Press the Select button in the main
in Trip A/B screen to reset
screen to switch between stopwatch and
MAX record.
Odometer
Display range: 0~99999 km (mile), reset automatically
Note:
after 99999 km (mile).
Switching on the instrument coincides Display unit: 1 km (mile).
Tripmeter
with the engine ignition. Settings can be
Display range: 0~9999.9 km (mile), reset automatically
performed only with the engine running.
after 999.9 km (mile).
Display unit: 0.1 km (mile).

WARNING LIGHTS

3
1
2
1 Headlight indicator
The system activates the indicator in synchrony with the activation of the mains beams.
2 Direction indicator lights
The system activates the indicator in synchrony with the activation of the direction
indicators.
3 Diagnostic indicator light
The system activates the light when a technical problem is detected.
GB
22