Warning; Packaging - Elite Drivo Handbuch

WARNING

• Drivo becomes hot during use. Wait for it to cool
before touching the resistance unit covers.
• Use the Drivo trainer as described in the ma-
nual.
• Drivo is not equipped with an emergency brake.
• Drivo has been designed and manufactured to
ensure maximum safety of the user and/or third
parties, but people, children and pets should be
kept away from the trainer during use as con-
tact with the moving parts of the trainer and the
bicycle may result in damage or injury.
• Never put your fingers or foreign objects of any
kind through the slots on Drivo, as there will be
high risk of damage to the trainer and/or serious
physical injury.
• Before you start training, place the trainer in a
suitable location, away from any potentially dan-
gerous objects (furniture, tables, chairs...) so as
to avoid any risk of accidental or inadvertent con-
tact.
• The Drivo is to be used by only single rider at
a time.
• The max weight limit of the user is 113 kg / 250
lb in accordance with the referenced norm EN
957-1 Class HC.
• Always check the safety and stability of the
bicycle on Drivo before training.
• No part of the product has any use beyond its
original application. The warranty will be void if
the unit has been opened or tampered with.
• Since the feet are made of soft non-slip mate-
rial, they may leave traces of rubber on the floor
during use.
• If the trainer needs to be shipped for technical
support and/or any other reason, it must be ship-
ped in its original box. Damage due to a failure to
use the original packaging is not covered by the
warranties.
Note: before shipping your trainer or any of its
parts for technical support, you must first consult
Elite or its distributor or your dealer. Any items
received without prior agreement will be rejected
• Do not leave the charger plugged in while not in
use.
• Do not store the Drivo in cold and damp places.
This may damage its electronic components.
• Use only the supplied charger.
• The Drivo compliance with EU laws (see "ecla-
ration of compliance", page 69) may be voided if
a charger different from the original is used.

PACKAGING

• If the roller needs to be shipped, careful packa-
ging is critical.
- Remove the charger cable from the Drivo;
- unplug the USB key from the PC;
- put the cable and USB key in a humidity-free
container;
- pack up the Drivo in its original box. During
shipments, packs often undergo mistreatment
and very hard impacts, therefore inadequate
packing can result in permanent damage to the
roller. This type of damage is not covered by the
warranty.
Note: before sending the roller or any other com-
ponent assistance, always firstly consult Elite or
the distributor.
Technical assistance:
Ph 0039 049 5940044
e-mail: real@elite-it.com
EN
27