Cleaning And Maintaining Your Scale; Cleaning And Maintenance; Troubleshooting - Mettler Toledo xpress XTC Bedienungsanleitung

STANDARD COUNTING SCALE

CLEANING AND MAINTAINING YOUR SCALE

CLEANING AND MAINTENANCE

− DO NOT allow untrained personnel to operate, clean, inspect, maintain, service, or tamper with this
equipment.
− DO NOT attempt to remove the cover or to perform service/maintenance on the internal parts of the
scale.
− ALWAYS DISCONNECT this equipment from the power source before cleaning or performing
maintenance.
− KEEP the scale clean. Periodically clean the keyboard and cover with a soft clean cloth that has
been dampened with a mild window cleaner or detergent. DO NOT USE ANY TYPE OF INDUSTRIAL
SOLVENT OR CHEMICALS. DO NOT SPRAY CLEANER DIRECTLY ONTO THE UNIT.
− DO NOT put the scale under water. Use a damp cloth to clean the scale.

TROUBLESHOOTING

If operational difficulties are encountered, first obtain as much information as possible regarding the
problem. Failures and malfunctions can often be traced to simple causes such as loose connections or
improper setup.
Additional troubleshooting can be performed by your authorized Xpress Service representative.
WARNING
DISCONNECT ALL POWER TO THIS UNIT
BEFORE INSTALLING, SERVICING,
CLEANING, OR REMOVING THE FUSE.
FAILURE TO DO SO COULD RESULT IN
BODILY HARM AND/OR PROPERTY
DAMAGE.
23