Communication Function; Data Output; External Commands - Mettler Toledo xpress XTC Bedienungsanleitung

STANDARD COUNTING SCALE

COMMUNICATION FUNCTION

With the optional RS-232 cable kit, the XTC can communicate to a printer or a PC.

DATA OUTPUT

Weight Data
t o t A L C n
>0< lb kg g Net CN APW B/G T
Weight Data
- 0 0 2 0 00 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T

EXTERNAL COMMANDS

The XTC can accept some ASCII coded commands from a host PC. The commands are identified as
follows:
Keys
[T][Enter]
[Z][ Enter]
[P][ Enter]
[C][ Enter]
[C][C][ Enter]
[T][XXXXXX][Enter]
[S][XXXXXX][Enter]
[A][XXXXXXXX][Enter]
For example:
Weight Data
0 9 5 0 00 0 9 5 0
u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 0 0 00 0 9 5 0
u u u
>0< lb kg g Net CN APW B/G T
Count
3 4 5 0 0
u
PT %Accy M < > PCS
Count
1 0
u
PT %Accy M < > PCS
Description
Equal to push-button tare operation
Equal to zero operation
Equal to print operation
Equal to clearing operation
Equal to pressing the key
Initiate XXXXXX as the tare
Initiate an APW. XXXXXX is the sample pieces and the
weight on the platter is the sample weight
Initiate XXXXXXXX as the APW
Count
1 0 0
u
M < > PCS
PT %Accy
Count
0
u
PT %Accy M < > PCS
In accumulation display mode, press
counts and CN or transmit the data to a PC.
In count or weight mode, press
pieces, and/or gross weight (The items depend on the soft
switch setting in the Setup Mode.) or transmit the data to
a PC.
twice
The scale is in the count mode.
Press the keys [T][Enter] on the keyboard of a PC. The XTC
will accept this command and tare the scale.
15
to print the total
to print the APW, tare,