Display Illustration; Configuration - Mettler Toledo xpress XTC Bedienungsanleitung

STANDARD COUNTING SCALE

DISPLAY ILLUSTRATION

The scale automatically moves to the first block as soon as the master mode is accessed. Press the key
to toggle among blocks [SCALE], [tArE], [SAMPLE], [dAtA], [SEriAL], [id] and [End]. When a block
is displayed, press the key
Setup Mode Sample Display—Major block
Weight Data
F 1 u S E r
>0< lb kg g Net CN APW B/G T

CONFIGURATION

Blocks
F1 User Block
F2 Scale Block
F3 Tare Block
to access the first sub-block or
Count
M < > PCS
PT
F1.1 Beeper
Off = Disable beeper
On = Enable beeper
F2.1 Power-up Weight Units
1 = kg
2 = lb
3 = g
The cursor corresponding to the selected unit should be "on" during this block.
F2.3 Digital Filter
0 = No filtering
1 = Light filtering
2 = Heavy filtering
F2.4 Blank Count Blank
Off = The count display will show whatever residual count is existing based on
the scale internal divisions and the APW entered, regardless of the weight
displayed.
On = When the weight display (gross and net) is reading zero, the count
display will be zero.
F2.5 Displayed Resolution Choice
0 = 5 lb/0.002 lb, 10 lb/0.005 lb, 20 lb/0.01 lb, 50 lb/0.02 lb
1 = 5 lb/0.001 lb, 10 lb/0.002 lb, 20 lb/0.005 lb, 50 lb/0.01 lb
2 = 5 lb/0.0005 lb, 10 lb/0.001 lb, 20 lb/0.002 lb, 50 lb/0.005 lb
3 = 5 lb/0.0002 lb, 10 lb prohibit, 20 lb/0.001 lb, 50 lb/0.002 lb
F3.1 Tare
Off = Disable tare
On = Enable tare
F3.2 Keyboard Tare
Off = Disable keyboard tare
On = Enable keyboard tare
to go to end block.
Setup Mode Sample Display—Sub-block
Weight Data
F1 1 o F F
>0< lb kg g Net CN APW B/G T
Sub Blocks/Parameters
Count
M < > PCS
PT
19