Cleaning The Terminal - Mettler Toledo IND500x Kurzanleitung

Failure to Tare If pushbutton tare is enabled and the operator presses the TARE scale function key, these common errors
may occur:
Function Disabled Error occurs if an operator attempts to access a disabled function
Access Denied. Occurs if an operator attempts to access an unauthorized function
User Not Authorized
Event Alert Icons

Cleaning the Terminal

To clean the ESD-protected keyboard and cover of the terminal:
•
Gently wipe the terminal's keypad and cover with a clean, damp, soft cloth.
• Use water or mild, non-abrasive cleaning agents.
• Do not use any type of acids, alkalis or strong industrial solvents such as toluene or isopropanol (IPA) that could damage the terminal's
finish.
•
Do not spray cleaner directly on the terminal.
•
Do not clean the terminal using high-pressure or high-temperature water.
• Build-up of dust layers must be avoided.
•
Remove light dust deposits using a damp cloth with a gentle wiping motion.
•
Do not use compressed air or vacuum to remove dust layers.
Follow good housekeeping practices to keep the terminal clean.
12 METTLER TOLEDO IND500x Quick Guide
Tare Fail Motion: Tare has failed due to motion on scale
Tare Negative Fail: Scale weight is below the current captured zero
Tare Failed-Over (range): The weight on the scale is over the calibrated capacity
Indicates scale
service is
scheduled, but
not yet due
Indicates scale
service is required
soon
Indicates scale
service should be
performed
immediately
30753869 | B | 01/2023