Operating Your Scale; Straight Counting; Push-Button Tare - Mettler Toledo xpress XTC Bedienungsanleitung

10

OPERATING YOUR SCALE

STRAIGHT COUNTING

Weight Data
0 0 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 2 0
u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 2 0
u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 2 0 00 0 2 0 0
u u
>0< lb kg g Net CN APW B/G T
Weight Data
3 0 0 0 00 0 2 0 0
u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 0 0 00 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 0 0
u u u
>0< lb kg g Net CN APW B/G T

PUSH-BUTTON TARE

Weight Data
0 0 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 2 0 00 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
3 0 0 0 00 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
- 0 2 0 0 00 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
- 0 2 0 0
u u u
>0< lb kg g Net CN APW B/G T
Weight Data
0 0 0 0
u u u
>0< lb kg g Net CN APW B/G T
Count
0
PT M < > PCS
Count
0
PT M < > PCS
Count
1 0
M < > PCS
PT
Count
1 0
u
M < > PCS
PT
Count
1 5 0 0
u
M < > PCS
PT
Count
0
u
PT M < > PCS
Count
0
PT M < > PCS
Count
0
PT M < > PCS
Count
1 0
u
M < > PCS
PT
Count
1 5 0 0
u
PT M < > PCS
Count
1 0 0
u
PT M < > PCS
Count
0
PT M < > PCS
Count
0
M < > PCS
PT
The XTC counting scale is in the weight mode and ready for
counting operation.
Place the samples on the platter (e.g. 10 pieces, total weight
is 0.020 lb).
Press the keys
Press the key to initiate Average Piece Weight (APW).
Note: If the sample weight is less than the minimum sample
weight set in the Setup Mode, the count window will show
"ADD XX" indicating that "XX" more pieces should be added
on the platter. After adding the required quantity, press the
key to re-sample.
Place the items to be counted on the platter (e.g. 1500
pieces including samples).
Remove all the items from the platter.
Press the key to clear the APW.
Place the empty container or wrapping material on the platter
(e.g., 0.2 lb), and then press
Place the samples in the container or on the wrapping
material and then onto the platter (e.g. 10 pieces, total
weight is 0.02 lb). Initiate APW by pressing the
keys .
Place the items to be counted in the container or on the
wrapping material and then onto the platter (e.g. 1500
pieces including samples).
Remove all the items from the platter.
Clear the APW data by pressing
Clear the tare by pressing
STANDARD COUNTING SCALE
to input the sample pieces.
.
.
again.