Maintenance; Cleaning; Disposal - Mettler Toledo ICS46 Serie Kurzanleitung

5 Maintenance

Maintenance of the weighing terminal is limited to regular cleaning.

5.1 Cleaning

Notes on cleaning
Only use a clean damp cloth and gently wipe the keypad.
•
Use water or mild, non-abrasive cleaning agents.
•
Do not spray cleaner directly on the weighing terminal.
•
Do not use any acids, alkalis or strong solvents.
•
Do not clean the weighing terminal using high-pressure or high-temperature water.
•
Observe all existing regulations on cleaning intervals and permissible cleaning agents.
•
Do not use compressed air or vacuum.
•
Remove dust layers.
•

5.2 Disposal

In accordance with the requirements of European Directive 2002/96 EC on Waste
Electrical and Electronic Equipment (WEEE), this device may not be disposed of
with domestic refuse. This also applies for countries outside the EU in accordance
with their respective national regulations.
− Please dispose of this product in accordance with local regulations for the
separate collection of waste electrical and electronic equipment.
Should you have any questions, please contact the corresponding authorities or the dealer from whom this
device was purchased.
If this device is passed on (for example for further private or commercial/industrial use), this regulation is
also to be passed on.
Many thanks for your contribution to the protection of the environment.
14 Maintenance
All manuals and user guides at all-guides.com
WARNING
Explosion hazard
1 Strictly observe the instructions of the operating company.
2 Avoid electrostatic charging by wearing suitable working clothes when operating in
hazardous areas.
ICS4_6x-series