Tyres; Lubrication - SIP STAR 850/26 T Betriebsanleitung

Instruction for work

5.3 Tyres

–
To mount tyres sufficient knowledge
and regulation tools are required.
–
Repair works on tyres are allowed to be
performed by professionals with proper
tools only.
–
Place the machine on flat and solid
ground. Secure it with wedges against
unintentional rolling off.
–
Check the tyre pressure regularly.
Check the tyre pressure regularly and fill it up if
needed, Compare the measured values with the values
given in the table.
Type Tyre
STAR 850/26 T 16 x 6,50 – 8 – 6 Ply
STAR 850/26 T 10,0 x 75 – 15,3

5.4 Lubrication

In the figure all the lubrication spots are marked. Long
life of the swather is achieved if the time intervals
shown here are met.
–
Repair works, maintenance, periodical
overhauls, cleaning and elimination of
funtctional disturbances must be
performed with the switched off drive
and stand still engine! Remove the
ignition key!
Pressure
(bar)
2,0
3,0
20