PeakTech 4105 Bedienungsanleitung Seite 81

4. Front-panel Menu Operation
4.1 Reference
4.1.1 Keypad description
There are totally 32 keys in the front panel, of which, 26 keys with certain definition
embraced with【】 .
10 function keys:
【Continue】【 Modulate】 【Sweep】 【 Burst】 【Dual Chan】【 Counter】 【CHA/CHB】
【Waveform】【Utility】 【Output】.
While, 【 Utility】key is used to set common parameter and 【Output】key is used to enable
or disenable output port.
12 keys in numeric keypad:
【0】 【1】【 2】【 3】 【4】 【5】【 6】【 7】 【8】 【9】are used to enter numbers.
【.】is used to enter decimal point and 【-】 is only available to enter allowed minus.
Four arrow keys:
【 <】 【 >】 were used to move the cursor left or right.
【∧ 】 【 ∨ 】 were used to increase and decrease the displa yed number when setting frequency
and amplitude.
The balance 6 keys under display are menu operation softkeys, embraced with 〖〗 and
used to select menu or unit.
4.1.2 Display description
The display screen is divided into four sections:
Top left section: CHA information
Top right section: CHB information
Middle section: parameters display of Frequency or Amplitude or Offset etc.
Bottom section: display of menu or unit.
80