PeakTech 4105 Bedienungsanleitung Seite 126

5.17.3 Menu background color
Press 〖Menu Color〗softkey then select 'Menu' to configure the desired menu color.
5.17.4 Background color of selected option
Press 〖Selected Color〗 then select 'Selected' to set the desired background color for selected option.
5.17.5 Border background color
Press 〖Border Color〗softkey then select 'Border' to configure the desired color of border.
Configure the desired color in palette, which includes 255 kinds of color type. The user can select any
color he likes for border with this function.
5.18 Frequency Counter
Press 【Counter】key to enter into counter menu.
Connect the external measured signal to 'Sync/Counter' connector in front panel, then to measure
the frequency, period, pulse width and duty cycle of measured signal.
5.18.1 Continuous Signal
The waveform generator can measure the frequency, period, pulse width and duty cycle of measured
continuous signal. Use multi-cycle measurement when high frequency to get a accurate result.
(1) Press 〖Freq〗softkey then select 'Frequency' to measure frequency of measured signal.
(2) Press 〖Period〗softkey then select 'Period' to measure period of measured signal.
(3) Press 〖Width〗softkey then select 'Width' to measure pulse width of measured signal.
(4) Press 〖Duty Cyc〗softkey then select 'Duty Cyc' to measure duty cycle of measured signal.
125