PeakTech 4105 Bedienungsanleitung Seite 143

7.1.8 Polarity and Phase
Output Polarity: positive or negative (compared to the displaying waveform)
Output Phase: (compared to sync) 0°to 360°
7.1.9 State Storage
Non-volatile Memory: 5 groups
7.1.10 Output Connector
Output Impedance: 50Ω(typical )
Protection: short-circuit protected, overload relay automatically disables main output
7.2 Modulation Characteristics (CHA)
7.2.1 FM, AM, PM, PWM and Sum Modulation
Carrier Waveforms:
Modulation Waveforms:
Modulating Frequency:
Frequency Difference:
AM Modulating Depth:
Phase Deviation:
Pulse Width Deviation:
Sum amplitude:
Sum frequency:
Modulating Source:
Sine, Square, Ramp (only pulse for PWM), etc.
Sine, Square, Ramp, etc.
1 μHz to 100 kHz
P 4105: 1μHz~15MHz
P 4115: 1μHz~30MHz
0% to 120%
0° to 360°
0% to 99%
0% to 100%
1μHz to 1MHz
Internal and External
142