PeakTech 4105 Bedienungsanleitung Seite 123

5.15.3 Memory
If U-disk is not applied to, 'Memory' will display 'Internal', which is available for store or recall
operation. While, insert U-disk to USB connector at the front panel, 'Memory' will display 'External',
indicating that the waveform generator will applied to U-disk to perform store. A file of 'STATEx.BIN'
(x＝1 to 4) will be created automatically in U-disk during store process, and the instrument state will
be stored in this file.
But in recall operating, the state parameters in the ''STATEx.BIN' file (x＝1 to 4) will be recalled to
generator.
With using of U-disk, the operator can save or use the desired working status parameters and both of
storage and recall operation by format BIN.
5.15.4 Language Setting
Press 〖Language〗softkey to choose Chinese language or English language. The selection is only
available for operate menu and prompt information. The rest sections are always displayed using
English language. If select one language, the generator will always use it and won't change even if
system reset and power off, unless select language again.
5.16 System Configuration
Press 【Utility】key then to 〖System Configur〗softkey.
122