Quick Start - PeakTech 4105 Bedienungsanleitung

2. Quick Start

If it's the first time for you to use the generator or you have no time to read the guide
carefully, you can get the basic operation as soon as you finish browsing the chapter1. If
more complicated functions are needed or meet difficulties in operation, please r ead
Features and Functions in chapter 3.
2.1 Prepare the waveform generator for use
2.1.1 Check the list of supplied items
Verify that you have received the complete unit according to the packing list. If you find
package damaged badly, leave it until the instrument passes performance test. If anything
is missing, please contact sales office
2.1.2 Connect the power
Turn on the instrument only the following conditions are met,
Power: AC 100 ~ 240 V
Frequency: 45 ~ 65 Hz
Power consumption: < 30VA
Temperature: 0 ~ 40°C
Plug the power cord into an AC100 ~240V socket with ground wire and press On /Off switch
below socket on rear panel. Then blinking power button on front panel indicating the
generator well connected with power but still in off state. Only press power but ton, the
generator initializes itself and obtains the default parameters, outputting continuous Sine
under normal working state, with signal's parameters displayed.
Warning: In order to ensure the security of the operator, use triple- core power socket with
ground wire.
Humidity: <80％
77