PeakTech 4105 Bedienungsanleitung Seite 120

5.14.7 Download Waveform
It is available to edit a simple user-defined waveform by keypad, and easy to be modified. But for
complicated waveforms, it will take too much time. Here introduce how to edit on computer by
waveform-editor software and download the waveform to the generator. Follow below steps:
(1) Install the waveform edition software written in the CD to the PC, connect the generator to PC
with an USB cable (enclosed with manual of waveform edit).
(2) Run the waveform edition software to edit a user-defined waveform.
(3) Download the user-defined waveform to the generator, which will enter into working mode of
waveform edit. The download user-defined waveform will show at edit window.
5.14.8 Store Waveforms
No matter how you create or edit, the final displayed waveform is only stored temporarily in volatile
memory, which will vanish once power off. If you want to preserve the waveform for a long time,
please store the waveform.
Press〖Arb Store〗softkey then 'Arb Store' to store the present arbitrary waveform to non-volatile
memory, and won't be lost even turn off power.
But stored new arbitrary waveform will cover the original waveform in same location. In order to
protect the original waveform, the waveform generator will pop a prompt 'Will cover original data,
Store?' before storing. Only press〖Yes〗softkey to enable the store. Otherwise, to press〖Cancel〗
softkey.
Press 〖Arb Store〗softkey to display 5 memory location from 〖User 0〗to〖User 4〗, select one to
store. 'Stored' will display after finishing.
119