PeakTech 4105 Bedienungsanleitung Seite 129

5.19 Output Port
There are four output ports on the front-rear panel: CHA, CHB, Sync and 10MHz output.
Forbid to input signal from output port, or the waveform generator will be damage.
5.19.1 CHA output port
Locate in front panel and the signal of CHA output from this port. Press 【Output】key
circularly to enable or disable the signal from CHA port. The indicator on the top of CHA
port light on or off to tell you whether the port is enable or disable.
5.19.2 CHB output port
Same as CHA port and won't introduce in detail.
128